HOW IT WORKS
Fine-tune watering with container height
Water is drawn from any container through a thin tube and delivered straight to the plant through the clay cone. You can control the flow simply by adjusting the height of the water container.
The water level in the water vessel
IS THE SAME OR SLIGHTLY LOWER
than the green Blumat sensor cap.
This is the ideal setup. The Blumat releases water based on the soil’s moisture level.
The water level in the water vessel
is much lower
than the green Blumat sensor cap.
Watering still responds to soil moisture, but the roots must work harder to draw in water—so the Blumat releases less.
The water level in the water vessel
is HIGHER
than the green Blumat sensor cap.
In this position, water flows directly into the cone, causing the Blumat to release water continuously—even if the soil is already moist. In this case, water discharge can be much higher.